16507/P0123/000291 - Throttle Position Sensor (G69): Signal too High Possible Symptoms. Malfunction Indicator Light (MIL) ON; EPC Light On; Increased Idle Speed; Bucking at Load Change; Possible Causes. Fuse(s) faulty; Wiring and/or Connector(s) from/to Throttle Position Sensor (G69) faulty; Throttle Position Sensor(s) Faulty; Throttle Body ...

May 31, 2009 · I have a VW Sharan with a 2.0 TDI CR (CFFB) from 2014. The last few days the MIL with the yellow engine has been on, even though the car seems to be running just fine. No noticable throttle problems. Any help would be highly appreciated on …

Sep 8, 2017 · hoping for some guidance on the following fault code on an obd1 vr: 00518 - Throttle Position Sensor (G69) ***** 30-10 - Open or Short to Plus -...

Apr 7, 2019 · Have a 2011 VW Passat CC, 2.0 TDI CFGB 106k miles. Fault is occasional stall with associated MFD message "stop/start inoperative, start engine manually" or similar. No MIL on dashboard, but intermittent fault codes shows.

16505/P0121 - Throttle Position Sensor (G69): Implausible Signal Possible Symptoms. MIL on; Poor engine performance; Possible Causes. Wiring Harness issue; Failed Throttle Body; Failed ECM; Possible Solutions. Test wiring as per Factory Repair Manual; Special Notes

Mar 15, 2017 · It turned out all that I needed to do to fix this was remove the connector; clean both sides of the connector with plastic safe electrical contact cleaner; spray both sides with plastic safe electronics lubricant and plug the connector back together.

Oct 31, 2005 · 1991 passat gl 16V stock 00518 Throttle Position Sensor (G69) 16-00 - Signal Outside Specifications what could cause this? Modified by 2low at 6:16...

Oct 9, 2020 · Just picked up a 1995 VW Cabrio with the 01M Auto trans. Am having shifting issues, so am going through the codes to see what I can clear. Only code that shows up in the trans module now is 00518 - Throttle Position Sensor (G69)

Oct 6, 2023 · G69 is the throttle valve control module internal position sensor. G79 is the pedal position sensor, and G185 is the secondary pedal position sensor.

Dec 4, 2017 · The component identifier Throttle Position Sensor (G69) may be Angle Sensor 1 for Throttle Actuator (G187) per the wiring diagrams for the vehicle in question. When is the code detected?: Malfunction is detected when an excessively low or high voltage from the sensor is sent to Engine Control Module (ECM).