Oct 8, 2006 · stack number/module number/port number is used. stack number refers the switch in stack if you have 3750 configured in stacking if no stacking configured it is always 1. module number always 0 on the Catalyst 3750 switch. port number is the physical interface on that particular stack if no ctacking configured then it is always referd as 1.

Dec 8, 2023 · With module provision switch, you can specify the expected module types and their slot numbers in advance. This provides a form of validation, ensuring that the modules installed in the chassis match the expected configuration.

Apr 3, 2019 · Generally a generic way of describing where a module or card are installed in the device. Sometime "large" modules or cards, themselves, can have other components installed in them as modules.

The switch module provides two 100/1000 Mb/s or Gigabit Ethernet SFP module slots ports: one standard Gigabit SFP module slot in the center (labeled GE0/2 ) and one SFP module slot for the dual-purpose port on the bottom (labeled GE0/1 ).

Line Modules and Management Modules. Line modules are on the front of the switch in slots 1/1 through 1/4 and 1/7 through 1/10. The number of ports depend on the line module. Line module ports are labeled in software as port or interface, depending on the context.

Management modules are on the front of the switch in slots 1/5 and 1/6. Line modules are on the front of the switch in slots 1/1 through 1/4, and 1/7 through 1/10. For example, the logical interface 1/1/4 in software is associated with physical port 4 in slot 1 on member 1.

Mar 10, 2022 · The first thing you need to know is the convention: slot#/port#. With this convention, it is indicating from less to more specific which port you are referencing. The slot can be the device itself or a slot for HWICs (High-Speed WAN Interface Card) or NMEs (Enhanced Network Module).

Mar 22, 2014 · <interface-name> slot/port is used whenever the interfaces are native on the network module. <interface-name> slot/subslot/port is used whenever the interfaces are on the WIC slot of a network module (NM).

Nov 27, 2024 · Use the show module [slot_number] command to display information about all the installed modules or for the module that you specify by its slot number. This example shows how to display information about all the modules that are installed in a chassis.

Dec 13, 2007 · To connect to a specific module from a remote location, use the attach command in privileged EXEC mode. attach {slot | {switch num module num}} Slot number. Specifies the switch to access; valid values are 1 and 2. Module number; see the "Usage Guidelines" section for valid values. This command has no default settings. Privileged EXEC (#)