These days, you could be forgiven for thinking driving an LCD from a microcontroller is ... Instead, [Ivan] decided to drive it directly from an Arduino Uno. This is easier said than done.

[John] over at the Little Bird Electronics blog recently wrote up a tutorial demonstrating the use of a TFT LCD panel with an Arduino ... commands over a serial interface, making it a simple ...

Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and ...

for instance Arduino, you would need atleast 6 I/O pins to talk to the LCD. However, if you use an LCD module with I2C interface, you only need 2 lines to process the display information. Now a days, ...

The Uno Rev3 ... Software-wise, the Arduino sketch is pretty straightforward with less than 100 lines. So if you want to modify it to add more fans, change the message on the LCD, or use a ...

Arduino has launched its next generation of UNO boards, introducing a 32-bit Renesas microcontroller ... Basically you can open an interface where you decide which variables you want to be available ...