In some ways, BYOK is one of the most minimalist to date. It’s a pocket-sized device with a LCD display, a microSD card ...

The company also explains how to easily check whether the USB-C cable is connected to the RP2350 MCU or ESP32-C6 module, since it depends on the orientation of the cable: Press and hold the BOOT ...

TikTok user @masterdriver666 demonstrated the "life-saving button" which allows drivers to escape their vehicle with "just one click". The latch is situated inside the boot and can be easily ...

AN EV driver has revealed a hidden button in boot which activates a useful feature missing from most motors. Cars expert DoneDeal took to TikTok to share the genius hack to hundreds of fellow drivers.

Espressif Systems has launched an update to their ESP32-S3-Box development kit for online and ... by a PCIe connector for various expansion modules. Power LED, Mute button and LED, boot mode button, ...

taking the Xbox Series X / S boot process from around 20 seconds down to around 15 seconds (including the time between pressing the power button and seeing the animation). It makes the Energy ...

Note: This tutorial was written after Arduino has officially launched its support for ESP32 boards. So if you have followed the old method of using GIT to install the boards then you would have to ...

If I unplug the ESP32 the boot loop stops, I can access the Tasmota web UI but somehow the chips goes read/only: the Pinout configuration in the Module configuration menu is reset (all pins set to ...

This is a mini-NTP based on a ESP32. Time will be provided from the GPS receiver ... For a bit more easy of use you can now change / swap the displaycontent during runtime with the boot button.

Let’s take a look at the ESP32 module ... as it supports serial communication EN Button: The EN button is the reset button of the ESP module. Pressing this button will reset the code running on the ...