It is possible to access the UART pins 8 and 10 on the 40 way connector if the serial port is enabled in raspi-config. The additional UART is mapped as /dev/ttyAMA0. Please can you update ...

Raspberry Pi enthusiasts may be interested to know that a new range of UART HATs has been created by Tony Chang based in Nottingham within the UK. Which have been specifically designed for both ...

These UART Pins are available on the 3 pins of the 40 Pin Connector. We can possible control the Raspberry Pi 3, using the console port. This is where the PiSerialixed comes in picture.

Raspberry PI STM32 UART Bootloader. This node module facilitates flashing an STM32 over the built in UART bootloader. The STM32 has a built in bootloader which can be accessed by setting the following ...

PicoUART6 fitted with a Raspberry Pi Pico board. 8086 Consultancy provides the pico-sexa-uart-bridge UF2 firmware that needs to be copied to the Raspberry Pi Pico and whose source code and binary file ...

[Dalton63841] started this project by trying to use the UART TX pin, but this turned out to be a dead-end. He decided instead to use an Arduino to monitor the 3.3V power rail on the Pi.

The Raspberry Pi’s venerable 40-pin header and associated HAT ecosystem for upgrades has been a boon for the platform. It’s easy to stack extra hardware on to a Pi, even multiple times … ...