There are so many nice hacks in [Joekutz]’s retro LED display project that it’s hard to know where to start. There’s his DIY LED display controlled by an Arduino UNO. To have some… ...

In the Arduino board, digital outputs from D2 to D8 are used to drive segments (a to g), and digital outputs D9 to D12 are used for the digits (D0-D3) of the 4×7 LED display. Note that here the ...

In this tutorial we are going to use a 32x16 LED dot Matrix display module which is also known as P10 LED Display Module to display a scrolling text by using Arduino UNO. P10 modules can be cascaded ...

In this project we are going to design an 8x8 LED matrix display, for that we are going to interface an 8x8 LED matrix module with Arduino Uno. An 8x8 LED matrix contains 64 LEDs which are arranged in ...

Our project is infact an Arduino with Serially Interfaced MAX7219 Operates an 8X8 LED Matrix to display a heart pattern. The MAX7219 IC is a serial input/output common-cathode display driver that ...

The LED Display board is a simple Arduino clone with a ATMega328p processor, 32768Hz RTC crystal, 16 LEDs and a reed switch. Fonts are included from the Adafruit GFX library, which can be installed ...

It is a LED clock built using the Arduino including controls for setting the time and the LEDs off. Each hour and minute digit is represented in binary form. It is a 6 by 4 display of neon tubes that ...

Want to display a PNG file on a display attached to an Arduino or other microcontroller board? You’ll want to look at [Larry Bank]’s PNGdec, the Arduino-friendly PNG decoder library whi… ...

This code can be used only with ordinary P10 led pannels . The library does not support SMD type led pannels due to scan rete differences. football.ino code could be used to run a timmer for football ...