Ok, if using an ATtiny is enough to get under the spotlights, here is mine: just a piece of PerfBoard, an ATtiny85, 2 zeners, 4 resistors, 2 caps, 1 LED, 1 header and 1 USB A connector (based on ...

Installing Digispark Drivers. To program the ATtiny85 using USB, you must have Digispark Drivers installed on your laptop, if you don’t have them, you can download it using the link given above. Then, ...

Programming ATtiny85 for Automatic Login System. After installing the drivers and setting up the Arduino IDE, now we are going to program the ATtiny85 to log in to Facebook, Twitter, and Gmail using ...

This article is not going to tackle microcontroller development boards, instead take steps to introduce the ATtiny85 USB Mini Development Board from Digispark ™! ... Digispark and allows it to act as ...

This project is a way to program ATtiny85, or 25 or 45. Using an Arduino, without using the Arduino ISP and without having to flash a bootloader on the ATtiny. An binary image of the ATtiny program ...

Also connect a 10uF capacitor between arduino RST and arduino GND. If using an electrolytic capacitor, put anode on RST and cathode on GND. Connect your arduino again via USB and go into the Arduino ...

“Possibly the smallest ATtiny85 based ‘duino derivative”. Indeed! When Olimex announced the Olimexino 85s as the smallest Arduino ever, [Tim] took that as a challenge. His very small Ar… ...

Attiny 85 USB development board | The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (of course a bit less powerful). With a whole host of shields to ...

Following on from getting an Arduino programme to run on an 8pin ATtiny (ATtiny85), I need to invoke the in-built brown-out reset circuit – because my application involves running from an ...