Here is a simple Arduino Camping Light project. In this design, only one push button switch is used to control the light output (from a bunch of white LEDs) between off, dim, medium, and full ...

As you can see, the setup is on the Arduino ground with a 433-MHz receiver ... With that in mind, I got a hold of the complete on-off keying (OOK) sequence corresponding to button “A” as expected.

(Google Translate) The wiring for this project is about as easy as you’d expect: the buttons connect to the digital inputs on the Arduino, and the LEDs on the digital outputs. When the Arduino ...

so I built her a "Button Box" based around an Arduino. Open source, hackable, and made by hand. This post is just a quick summary - I'll be doing a much more in depth blog post about it at some ...

a desk-mounted panic button is undoubtedly cool, and it makes for a great DIY Arduino project. You'll need a prepaid SIM card, an Arduino, a GPRS shield, and a few other odds and ends. Luckily ...

The button states could easily be read by using an Arduino’s analog input. A Pro Mini model was chosen for its small size as it could be housed in the radio compartment of the dash. The next ...

Created by the Lenka Design Workshop the case has been created using a 32×32 LEGO baseplate finished with a clear acrylic cover to house the four large arcade buttons and Arduino board ...

Based on an Arduino Micro, this project gives you a small control panel with two buttons. The smaller green one toggles between minimum and maximum thrust and the red one launches or stages the ...