the addition of overcurrent/short protection as well as overcurrent/short indication makes the circuit more useful than a typical Zener/transistor regulator. Yet designers should be aware of ...

Advanced Analogic Technologies Inc. (AnalogicTech) has introduced a new dual Low Dropout (LDO) linear regulator ... complete overcurrent and short-circuit protection. In addition, overtemperature ...

Note, the PWM duty factor (DF) is from 0 to 1, where: Vout = Vsense(R1/(R2/DF) + 1) = DF(11.5)0.8 + 0.8 = DF*9.2 + 0.8v Figure 2 Three parts comprise a circuit for linear ... protection for U1’s ...

He wound up using two common NPN transistors and 4 1K resistors. The circuit isn’t going to beat out a cheap linear regulator IC, but for the low component count, it is actually pretty good.

This 24V to 36V linear battery charger is long overdue ... so you may have to drill your own heatsink for the 2N3055 transistor. The battery charger circuit has short-circuit protection, but this is ...

You need a power source, a way to level convert the driver pins, and some protection in case something goes wrong with the circuit ... a 7824 regulator can handle. That’s a 24V linear regulator ...

1). Before addressing those requirements, let's review the basic concept of overcurrent protection. When current exceeds the rating of conductors or equipment — due to overload, short circuit, or ...

Conductor overload protection is not required where circuit interruption would create a hazard (e.g., a fire pump). Short-circuit protection is still required. You can use the next higher standard ...