so following up on a recent news-inspired item in which we took a look at what lies behind the Ethernet jack on a Raspberry Pi, we’d like to continue that theme by looking behind more pins and ...

The heart of your project will be a Raspberry Pi ... then connect your jumper wires to the pins on the Pi and on the breadboard (see the diagram below). Connect the two wires on each DC motor ...

A few days ago we reported on a new product for owners of the Raspberry Pi Zero, a set of solderless header pins that had a novel ... The fix would be a simple case of soldering the connector ...

The Raspberry Pi is a great little ... one from the 5v output pin on the PowerBoost to the Pi's 5v input (labeled on the GPIO diagram above), and one wire from the pin labeled "gnd" on the ...

As I've said before, the Raspberry Pi 4 runs relatively ... There is a diagram on the box that shows that the red and black power wires connect to GPIO pins 4 and 6, and the blue wire (which ...

If you’re handy with a soldering iron, those simple car transmitters can ... Add an antenna Plug a strip of wire into the GPIO4 pin on your Raspberry Pi (the fourth pin down on the left side ...

The Raspberry Pi board has a 40-pin GPIO header on it that needs through-hole soldering, along with bits like the Ethernet and USB ports. These require robust solder joints, which can't be done ...