Arduino driver for the PAA5100JE and Pixart PMW3901(not tested atm) optical flow sensors. The driver was originally developed to support the Bitcraze Flow Breakout board. It communicates with the ...

Next we connected the water flow sensor’s output to the Arduino board (filled with the sketch) and allowed water flow through the water flow sensor at a steady rate of about 1 Litre/minute. Besides ...

Arduino driver for the PAA5100JE and Pixart PMW3901(not tested atm) optical flow sensors. The driver was originally developed to support the Bitcraze Flow Breakout board. It communicates with the ...

The complete water flow sensor Arduino code is given at the bottom of the page. The explanation of the code is as follows. We are using the header file of the LCD, which eases our interfacing the LCD ...

Project Overview “In this Instructable we’re going to build a budget spinning LiDAR sensor, powered by Arduino. It cost less than £30 to build ($40) and has a diameter of only 30mm (1.18″).

Emergence of Controlled Environment Agriculture (CEA) ranging from computer controlled water irrigation system to lightning and ventilation has changed the conventional scenario of farming. This paper ...