News
Similarly, when the voltage is negative current flows through the diode D4, the reset-coil, and D1, while the set-coil is de-energized. Again only one coil is on at a time. Figure 2 Four diodes are ...
2. Experimental setup of the bridging-droplet thermal diode. (a) Photograph of the wicked copper plate possessing an array of wetted micropillars of dimensions 100 × 100 × 600 μm.
In forward mode, approximately 150 µA flows through the diode, causing D4 to be reverse-biased and holding comparator U1’s inverting input low. This turns off the red LED.
These single-stage instrumentation amplifiers accurately measure very small sense voltages across a wide range of common-mode voltages up to 26V while operating from a 2.7V to 5.5V supply. Automotive ...
The article describes a series of experiments in which the material developed a preference for current to flow in a particular direction, a phenomenon known as rectification, under a broad range ...
Results that may be inaccessible to you are currently showing.
Hide inaccessible results