It’s a huge headache and one that [TechKiwiGadgets] hopes to solve with the Arduino Cable Tracer. The tracer works with USB-A, Mini-USB, Micro-USB, and USB-C cables to determine whether ...

Approx 70% smaller footprint, additionally includes RJ45, USB-A3, USB-B3, USB-B, USB-Micro3, touch screen menu that enables manual selection of ports to do a deeper diagnosis of faulty cables ...

Meanwhile, the Arduino Mega is getting the same USB chip along with an ATMega2560 processor with twice the memory. Right now only 128K is available, but that's a software limitation and they're ...

The Arduino Cable Tracer has been created using an Arduino Mega 2560 board with its IO pins connected to USB-A, USB-C, Micro-B, and Mini-B ports.

Plug the board into your computer using the USB Type-A to USB Type-B cable, then open Arduino IDE. ... > Arduino/Genuino Uno to select the type of Arduino you’re using.

Upload the code to the Arduino Uno using the Arduino IDE. Open the Serial Monitor (set to 9600 baud). Observe the voltage readings and fault messages in real time. 📊 Sample Output markdown.

This includes red and green LEDs and matching resistors, printed howtos, breadboard, Arduino Uno, USB cable, wires, and other goodies for multiple projects. $85. Adafruit Wave Shield for Arduino.

The board itself also has some differences from the original Arduino Uno. First of all, it has a USB type-C port, which is definitely a bonus. Secondly, it’s simpler: No USB-UART ...

ATmega328 MCU: The heart of the board, just like in the classic Arduino Uno. USB-to-UART Converter: For programming the MCU. USB-C Programming Port: Modern, fast, and convenient. 3x3 RGB LED Matrix: ...

This project is designed to detect faults in underground cables and pinpoint the approximate location of the fault. It uses an Arduino Uno as the main controller and measures resistance variations to ...