This typically includes resistors, push buttons, and sensors ... using one of the built-in examples in the Arduino IDE. The most beginner-friendly sketch here is the "Blink," which simply makes ...

Did you know that you can use Arduino to turn on an LED when you press a ... Actually you can disconnect the board from the power supply or USB. /* sketch 2 turn on a LED when the button is pressed ...

The button states could easily be read by using ... This feature was easily created in the Arduino sketch.

Go ahead and click the Upload button in the Blink Sketch IDE window. That's it. You've now compiled and run your first sketch. If everything worked, you will see the built-in LED on your Arduino ...

[Lars] shows you how to get a perfect score on the first four levels of BIT.TRIP RUNNER by using an Arduino to time and send button presses ... hard-code it into the sketch.

This module is modeled after an Etch A Sketch and combines Arduino and Processing sketches ... and incorporates a simple circuit including two potentiometers and one button. The presentation material ...

With the Create Agent, you can view, create, and edit sketches ... and you don't even need an Arduino board on standby to install it. Click the Start button in the bottom-right of the page.

In this quick Arduino tutorial I will explain how you can control a relay using the Arduino Board, one 1K and one 10K resistors, 1 BC547 transistor, one 6V or 12V relay, one 1N4007 diode and a 12V fan ...

Created by the Lenka Design Workshop the case has been created using a 32×32 LEGO baseplate finished with a clear acrylic cover to house the four large arcade buttons and Arduino board ...

Patrick's da Vinci is nothing less than a classic Etch-a-Sketch driven by stepper motors and controlled by an Arduino. Oh – and the frame and gears are all laser-cut, just to bump the coolness ...