This repository holds the arduino code that is loaded onto the ESP32 board to get the IR data from the sensor and send it over wifi to a local port. The majority of this code was provided by Boston ...

This is a little project for the ESP32 Dev Board based on this repository.It allows the user to connect multiple sensors like the Sharp GP2Y0A21YK0F Infrared Proximity Sensor to the ROS1 Melodic ...

In this article, we interface HC-SR501 PIR sensor module with ESP32. ... then you should definitely consider using an HC-SR501 Passive Infrared Sensor or PIR sensor for your project, because as the ...

The PMW3901 is a small, low-power optical flow sensor that measures movement by analysing surface patterns. It is widely used in robotics, drones, and automation to estimate position changes without ...

The HDMI switch is equipped with an infrared sensor as the only means of controlling it, so naturally, that was the path chosen for interfacing the ESP32 put inside the switch.

While there are plenty of ESP32 camera boards, it’s much harder to find off-the-shelf solutions with ESP32 wireless SoC and an IR thermal camera.. That’s likely why Dan Julio decided to design ...

Figure 7: The Sensor Evaluation Board with sensor modules inserted, illustrating the modular approach. When comparing these external ADCs to the ESP32-S3’s built-in ADC, the improvement is stark. The ...